Optional equipment for RIB’s training units

The UV 700-series consists of optional equipment for the RIB Training units.
It is mainly components for control, alarm and supervision.

UV 703 – Alarm and control unit for UV 300

UV 704 – Energy measurement for UV 300

UV 705 – DCS-system for RIB process units – ABB 800xA – RIB Edition

UV 706 – Steam turbine for UV 300

UV 711 – Control and alarm unit for UV 103/104 and UV 150/151

UV 720 – Control system for RIB process units – ABB Compact HMI 800 – RIB Edition

UV 730 – Controller package with operator panel for RIB process units – ABB touch screen – RIB Edition

SEE BROCHURE UV 700

UV 704 Energy measurement for UV 300

The energy package makes it possible to do energy exercises and calculations on control model UV 300. The energy package contains several meters that together with the standard meters makes it possible to calculate energy efficiency and more.


Measurement points:
TI-7 Exhaust temperature before the superheater
TI-8 Exhaust temperature after the superheater but before the economizer
TI-9 Exhaust temperature after the economizer
TI-10 Steam temperature before the load valves
TI-11 Steam temperature after the load valves
TI-12 Condensate temperature
TI-13 Feed water temperature before the feed water pump
PI-4 Feed water pressure before the boiler
PI-5 Steam pressure before the superheater
PI-6 Steam pressure before the load valves
FT-4 Cooling water flow

UV 706 Steam turbine for UV 300

SONY DSC

A modern high efficiency steam turbine. The turbine also includes a generator with rectifier and speed transmitter with 4-20 mA output.
In standard the turbine is delivered with 170 VDC but can also be equipped with a DC/AC converter for 230 VAC 50 Hz output.
Together with UV 300 the steam turbine can produce maximum 600 W electrical power.

Components
– Turbine
– Control valve for speed control
– Vacuum pump
– Steam separator
– Power resistor for dumping the electrical energy
– All necessary tubing

UV 711 Alarm and Control unit for UV 103/104/150/151

SONY DSC

This unit is used for connection of  automation equipment for digital control and interlocking to UV 103/104 and UV 150/151. UV 711 makes it possible to monitor the level in the storage tank, the pressure after the pump and feedback of pump start. It also makes it possible to control the pump and one outlet valve.
Interface unit UV 711 is to be mounted on Level control model UV 103/104 and Level and flow control model UV 150/151. All signals is 0 – 24 VDC.

Components
– Unit with relays and connection terminals
– Solenoid valve for outlet valve
– Digital pressure sensor
– Digital level sensor

The control system consists of a combined Operator and Engineering workplace to be installed on a PC computer. The controller and I/O hardware is mounted on a panel. All needed configuration and pictures is included in the delivery. The  programs is preinstalled in the controller. All programming, configuration and pictures can be changed by the user. The system is completely open.
The difference between a DCS system (ABB 800xA) and ABB Compact HMI is that in the DCS system everything is integrated. E.g. when adding a new controller the corresponding faceplate is automatically added in the operator interface. In ABB Compact HMI the faceplate has to be added and connected to the controller.
The system features the following components in the base package:
1 pc ABB Compact HMI 800. Operator and engineering workplace
1 pc Controller, CPU
1 pc AI Analog input 1×8 ch
1 pc AO Analog input 1×8 ch
1 pc DI Digital input 1×16 ch
1 pc DO Digital output 1×16 ch

The system can be upscaled with operator stations and different units such as field bus devices, motion control etc. The system can also be upgraded to an true DCS system.
If optional equipment Alarm and Control unit UV 703 is included in the delivery. The UV 703 is integrated with the UV 720.
UV 720 can be used with all RIB training units. It replaces the panel mounted controller(s) and recorder.
UV 720 can be used together with existing older units that has panel controllers as well as new units manufactured without panel controllers.

Click here for broschure of ABB Compact product suite

UV 730 Controller package

SONY DSC

The control package consists of one operator panel, one processor unit and I/O modules. The processor unit and I/O modules are mounted on a tray. All needed configuration and operator graphics is included in the delivery. The controller program is preinstalled in the processor unit.
The panel and controller is programmed with different softwares and is not included in the delivery. It is possible to ad these softwares at any time. Before or after delivery. All programming and graphics is then open to the user.


Components:
The system features the following components in the base package:
1 pc ABB operator panel, 7 inches Touch TFT 800×480.
1 pc Controller, CPU PM851
1 pc AI Analog input 1×8 ch
1 pc AO Analog input 1×8 ch

The system can be upscaled with operator panels, operator stations and different units such as field bus devices, motion control etc. The system can also be upgraded to UV 720.