Training stations for training in industrial measurement and adjustment of different components for process control and instrumentation

 The UV 600-series consists of 8 stations for basic training in measurement technics and adjustments of different Process control instruments:
  • Pressure – UV 601
  • Flow – UV 602
  • Level – UV 603
  • I/P-Converter – UV 604
  • P/I-Converter – UV 605
  • Temperature – UV 606
  • Temperature – UV 609

Training manuals in English.

SEE BROCHURE UV 600-series

UV 601

UV 601 is a pressure measurement station used for mounting exercises, adjustments and control of a pressure transmitter. Measurement errors can also be studied. The pressure is generated with a pressure regulator and the output from the transmitter, 4-20 mA, is shown on a display. The transmitter is of smart type and can be adjusted locally and with a communicator.
Laboratory exercises
– Zero adjustment.
– Span adjustment.
– Studies of the transmitter design, function and connection.

UV 602

UV 602 is a flow measurement station. The water is pumped around in pipes with a centrifugal pump. On the pipes a ring chamber is mounted for measuring the differential pressure over an orifice plate. There is also a rotameter mounted in the piping. UV 602 can be used for mounting exercises, changing of orifice plate, adjustment of differential pressure transmitter and measurement characteristics. UV 602 is also suited for studies of the differential pressure as a function of the flow. The transmitter is of smart type and can be adjusted locally and with a communicator.
Laboratory exercises
– Zero adjustment.
– Span adjustment.
– Replacement of ring chamber and orifice plate.
– Studies of the transmitter design, function and connection.
– Characteristic of the differential pressure over the orifice plate

UV 603

UV 603 is a training station for mounting exercises, adjustments and check of a pressure transmitter for level measurement. The transmitter is of smart type and can be adjusted locally and with a communicator.


Laboratory exercises
– Zero adjustment.
– Span adjustment.
– Studies of the transmitter design, function and connection.

UV 603 is a training station for mounting exercises, adjustments and check of a pressure transmitter for level measurement. The transmitter is of smart type and can be adjusted locally and with a communicator.Laboratory exercises- Zero adjustment.- Span adjustment.- Studies of the transmitter design, function and connection.

UV 604

UV 604 is a training station for exercises in adjustments of a I/Pconverter. The station consists of a I/Pconverter that is supplied with a 4-20 mA current. Measurement errors can also be studied.
Laboratory exercises
– Zero adjustment.
– Span adjustment.
– Studies of the converter design, function and connection.

UV 605

UV 605 is a training station for exercises in adjustments of a P/I-converter. The station consists of a P/I-converter that is supplied with air pressure from a pressure regulator. The output from the P/I-converter is shown in mA on a digital display. Measurement errors can also be studied.
Laboratory exercises
– Zero adjustment.
– Span adjustment.
– Studies of the converter design, function and connection.

UV 606

UV 606 is a temperature measurement station that consists of ventilation shaft where different kind of temperature transmitters can be fitted. To achieve different temperatures there is a heating fan mounted in one end of the shaft. The temperature transmitters is connected to a recorder that shows the temperatures and prints them on a paper. UV 606 is very well suited for exercises in mounting and connecting temperature transmitters, studies of the influence of the measurement point and configuration of a microprocessor based recorder. If UV 606 is equipped with the optional smart temperature converter, exercises in connections and configuration of a smart temperature transmitter ca also be done.
Laboratory exercises
– Identification of sensors.
– Connection of T/C and RTD.
– Configuration of reporter/recorder.
– Temperature measurement and alarm printing.
– The influence of the length of protecting tube outside the process.
– The influence of the length of protecting tube inside the process.
– Measurement of time constants.

UV 609

UV 609 is a newly developed measuring station for temperature measurement and troubleshooting. All components are available in a handy case that is also used in the exercises. UV 609 contains two temperature sensors. A resistance thermometer and a thermocouple. In addition, a signal converter and a display. UV 609 can be used for studies of various temperature sensors, time constants, the influence of the mounting.
Laboratory exercises
– Configuration of the signal converter via the front.
– Connection of the temperature sensor to the signal converter and display.
– Troubleshooting.
– The influence of the length of the sensor outside the process.
– Measurement of time constants.
– Difference of time constants depending on media.
– Identification of temperature sensors.
– The influence of damping.